PAWSAIC Modular Carpet Tiles
PAWSAIC modular carpet tiles are made for spaces shared by people and pets. Each tile can be installed, moved, cleaned and replaced individually—so everyday messes never mean cleaning or replacing the entire rug.
Designed for everyday living
Each tile measures approximately 15.75 × 15.75 inches (40 × 40 cm) and is approximately 0.2 inches (5 mm) thick.
The surface is made with high-density polyester loop pile - comfortable touch, durable for everyday use, easy vacuuming and pet-hair removal. The TPE thermoplastic rubber backing with static adsorption keeps tiles stable on smooth indoor flooring.
The modular design lets you mix colors, create patterns, expand your rug or rearrange the layout whenever your space changes.
Before you begin
Make sure the floor is clean, smooth, dry and free from visible dust.
Arrange the tiles on the floor first to confirm the overall size, color placement and pattern. You can also use your saved PAWSAIC Studio design as a guide.
Create your layout
Begin along a wall, beside a piece of furniture or at one corner of your planned rug.
Place the first tile flat on the floor, then position the next tile directly beside it. Keep the edges closely aligned without overlapping.
Continue following your design until the layout is complete. If a color or position does not feel right, simply lift the tile and move it.
Once finished, check that every tile lies flat and that the edges are evenly aligned.
Make it fit your space
Tiles can be trimmed to fit around walls, corners, columns or furniture.
Measure the required area, turn the tile over and mark the cutting line on the backing. Use a straightedge and a sharp utility knife to cut along the line.
For a cleaner finish, place the cut edge against a wall or underneath furniture. Keep children and pets away from the area while cutting.
Easy everyday cleanup
For everyday dust, crumbs and pet hair, simply use a vacuum cleaner, lint roller or soft carpet brush.
The dense loop-pile surface makes routine debris and pet hair easy to remove. Regular vacuuming is usually all that is needed.
When spills happen
Absorb the liquid with a clean cloth or paper towel, then gently wipe the affected area with a damp cloth. A small amount of mild detergent can be used when needed.
There is no need to remove or clean the entire rug—only treat the affected tile or area.
For a deeper clean
Lift the affected tile from one corner and clean it with water and a small amount of mild detergent.
Rinse away any remaining detergent, press the tile with a towel to absorb excess water and lay it flat in a well-ventilated area to air-dry.
Once completely dry, return the tile to its original position. Unlike adhesive-backed carpet tiles, Pawsaic tiles have no glue to wear out - the static-adsorption backing keeps its grip wash after wash, so the same tile can be cleaned and relaid again and again.
One messy tile means cleaning one tile—not the entire rug.
Replace only what you need
If a tile becomes permanently stained or worn, it can be replaced individually.
Remove the affected tile, wipe or vacuum the exposed floor and place a replacement tile in the same position. Align the edges with the surrounding tiles and continue using your rug as usual.
There is no need to replace the entire rug or reinstall the surrounding area.
Made to change with your home
Vacuum regularly, absorb spills when they happen and allow cleaned tiles to dry before reinstalling them.
Keep a few matching tiles for future replacement or expansion. Slight color variations may occur between different production batches.
Rearrange the colors, reshape the rug, expand the covered area or replace a single tile—PAWSAIC makes everyday life with pets easier, more flexible and more beautiful.